Description
Relief valve:
The relief valve (RV) is a type of valve used to control or limit the pressure in a system or vessel which can build up for a process upset, instrument or equipment failure. Vacuum safety valves (or combined pressure/vacuum safety valves) are used to prevent a tank from collapsing while it is being emptied, or when cold rinse water is used after hot CIP (clean-in-place) or SIP (sterilization-in-place) procedures. When sizing a vacuum safety valve, the calculation method is not defined in any norm, particularly in the hot CIP / cold water scenario, but some manufacturers have developed sizing simulations.
Sanitary Valves
Valves are process components that provide dynamic seals within the process.Is a device that regulates, directs or controls the flow of a fluid (gases, liquids, fluidized solids, or slurries) by opening, closing, or partially obstructing various passageways. Valves are technically fittings, but are usually discussed as a separate category. In an open valve, fluid flows in a direction from higher pressure to lower pressure. They also provide seals between the process and the atmosphere.
Keep Your Sanitary Fluid Operations Tight And Sealed
Suitable for use in the food, dairy, beverage, pharmaceutical and industrial markets, sanitary relief valve clamp ends are an important part of controlling the flow of your fluid product.
- Suitable for all hygienic applications
- Surface finishing 180 Grit ID/150 Grit OD
- Adjustable relief pressure range from 45 to 90 psi
- Maximum operating pressure rating of 140 psi (depending on valve size) at 70 degrees Fahrenheit ambient temperature
- The relief valve is available in only 316 stainless steel alloy
- Available in sizes ranging from 1-1/2 inch all the way to 2 inches
When it comes to looking for high quality sanitary stainless steel fittings, including our Trynox sanitary relief valve clamp ends, you’ve come to the right manufacturer. Sanitary stainless steel valve clamp ends are essential to maintaining a sealed and pressurized hygienic liquid operation. With Chemseal’s Trynox sanitary relief valve clamp ends, you can do the job right. Don’t go another day without getting the best sanitary stainless steel fittings on the market. See why Chemseal will make a positive impact in your fluids business.
Tri-Clamp Sizing Guide
Tri-Clamp Fittings and Gasket Sizing Guide
Sanitary Size | OD of Flange End | ID of Tube | OD of Tube |
---|---|---|---|
1/2″ | 0.992 | 0.370 | 0.500 |
3/4″ | 0.992 | 0.620 | 0.750 |
1″ | 1.984 | 0.870 | 1.000 |
1 1/2″ | 1.984 | 1.370 | 1.500 |
2″ | 2.516 | 1.870 | 2.000 |
2 1/2″ | 3.047 | 2.370 | 2.500 |
3″ | 3.579 | 2.870 | 3.000 |
4″ | 4.682 | 3.834 | 4.000 |
6″ | 6.562 | 5.782 | 6.000 |
8″ | 8.602 | 7.782 | 8.000 |
Tubing Dimensional Tolerances
A-270 Sanitary Tubing Dimensional Tolerances
Tubing
A tube, or tubing, is a long hollow cylinder used for moving fluids (liquids or gases)
For Beverage & Sanitary stainless steel tubing for the Brewery, Food, Dairy and Pharmaceutical Industries must be manufactured in 304L & 316L polished on the ID to 20u-in Ra/OD to 30u-in Ra, Following standards like ASTM A-269; A-270, DIN 11805 or ENxxxxx
All dimensions in inches (mm)
Size OD |
Wall Thickness |
Outside Diameter |
Length |
Wall |
1" (25.4) |
0.065" (1.65)/0.049" (1.25) |
+/-0.005 (0.13) |
+1/8" (3.18) |
- 0 +/-10.0% |
1-1/2" (38.1) |
0.065" (1.65)/0.049" (1.25) |
+/-0.008 (0.20) |
+1/8" (3.18) |
- 0 +/-10.0% |
2" (50.8) |
0.065" (1.65)/0.049" (1.25) |
+/-0.008 (0.20) |
+1/8" (3.18) |
- 0 +/-10.0% |
2-1/2" (63.5) |
0.065" (1.65) |
+/-0.010 (0.25) |
+1/8" (3.18) |
- 0 +/-10.0% |
3" (76.2) |
0.065" (1.65) |
+/-0.010 (0.25) |
+1/8" (3.18) |
- 0 +/-10.0% |
4" (101.6) |
0.083" (2.11) |
+/-0.015 (0.38) |
+1/8" (3.18) |
- 0 +/-10.0% |
Gasket Compatibility Chart
Sanitary Gaskets General Performance Properties
Nitrite (Buna) |
Fluoro-Elastomer(Viton) |
Platinum Cured Silicone Elastomer |
Ethylene-Propylene Diene Monomer(EPDM) |
PolyTetra Fluoro Ethylene(Teflon) |
Tufsteel |
|
Letter Designation |
U |
SFY |
PX |
EPDM |
G |
GTS |
Sanitary Gasket Color Code |
RED |
Yellow & White |
Pink |
Green |
Remains White |
Remains Grey |
Max Temperature Intermittent |
240Deg F |
410Deg F |
580Deg F |
300Deg F |
450Deg F |
578Deg F |
Max Temperature Continuous |
210Deg F |
380Deg F |
490Deg F |
260Deg F |
400Deg F |
526Deg F |
Minimum Temperature |
-65 |
-20 |
-85 |
-70 |
-350 |
-370 |
USP Class VI |
No |
Yes |
Yes |
Yes |
Yes |
Yes |
Steam in Place Performance |
Poor |
Good |
Good |
Good |
Good |
Excellent |
Acids, Dilute |
Good |
Excellent |
Good |
Good |
Excellent |
Excellent |
Alkalies |
Good |
Good |
Excellent |
Excellent |
Excellent |
Excellent |
Alcohol, Glycols |
Excellent |
Good |
Excellent |
Excellent |
Excellent |
Excellent |
Animal Oils & Fats |
Excellent |
Excellent |
Good |
Fair |
Excellent |
Excellent |
Soaps, Bleaches, Detergents |
Fair/Good |
Good |
Fair |
Excellent |
Excellent |
Excellent |
Vegetable Oil |
Excellent |
Excellent |
Excellent |
Fair |
Excellent |
Excellent |
Water |
Good |
Excellent |
Good |
Excellent |
Excellent |
Excellent |
Shipping & Return Policy
Shipping & Return Policy
All orders are shipped within 24 hours Monday - Friday 8am - 5pm. If a tracking # is provided by the shipping carrier, we will update your order with the tracking information.
Shop with confidence with our 30 days hassle free returns no questions asked, just return the product and get a 90% refund.
If you are not seeking a refund, instead you want to exchange your item for a different size or material, or just a completely different product you can! You will not be subject to a restocking fee in this case, but you still will have to pay return shipping.